The Annihilator
ANILE-8R Single Band (UHF or VHF Models Available) Analog Portable Two-Way Radio
Versatile Radio for Amateur and Commercial USE

The ANILE-8R is certified for use on commercial and amateur frequencies. The ANILE-8R is FCC Certified for Part 90 usage and is able to Transmit and Receive fully on Narrowband (12.5kHz).


The ANILE-8R is the most accurate and reliable radio in its class, with deviation at a minimum the ANILE-8R will only receive signals that you want. The ANILE-8R has an accurate receiver that will filter out any noise that is not on your chosen frequency or squelch setting. It out-ranks any other receiver in its class!

Priority scan

The ANILE-8R has multiple options of priority scanning, never miss an important call again. While scanning through the channel bank you can select a priority channel to keep checking in, even if another channel receives a call.

Group and individual calling supported

The ANILE-8R supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by individual or by group. Tone calling (private line) is required by most commercial applications and the ANILE-8R supports the latest standards, even allowing custom CTCSS Tones.


The ANILE-8R can even decode (receive) DTMF commands. This allows Remote Stun, Remote Kill and more.

Internal VOX function

The ANILE-8R has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.

Customize Your Operation with Channels, Programmable Buttons, and more!

You can program your ANILE-8R exactly how you want it. There are 16 programmable memory channels. You can add or remove channels from being scanned. The side keys have functions programmable for both 'short' and 'long' key presses allowing up to 4 programmable options on two keys. The dual selector knob allows you to choose from one of 16 channels, with a secondary knob to control the volume. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate and you can change the power level on the spot.  You can easily program from a PC to set-up the radio to operate exactly as needed.



What's In the Box?

ANILE-8R Radio Body

1300mAh Battery

High Gain Antenna

Earpiece with Remote Mic

Desktop Charger

120v AC Adapter

Belt Clip

Wrist Strap


Frequency range:

[TX] 136 - 174MHz or 400 - 520MHz

[RX] 136 - 174MHz or 400 - 520MHz

Channel Capacity:

16 Channels

Channel Spacing

25KHz (wide band)12.5KHz (narrow band)


≤0.25μV (wide band)  ≤0.3μV (narrow band)

Operation Voltage

7.4V DC ±20%




Antenna Connector: SMA-Female / Antenna Impedance: 50Ω

Accessory Connector:

Kenwood 2 Pin Standard



Output power: 

5W / 1W


127×60×35mm (with battery)


219g (with battery, antenna, belt clip)

Audio Power Output

1000mW/10% (1 WATT)

NSTIG-8R, ANILE-8R Charger

Replacement Charger and transformer

QBC-42L Charger

QPS-01 AC Transformer


NSTIG-8R, ANILE-8R Belt Clip

Replacement Belt Clip


Includes Screws

ANILE-8R UHF Antenna

Replacement Antenna


Stock UHF Antenna

NSTIG-8R, ANILE-8R 1800mAh Battery

Replacement Battery



NSTIG-8R, ANILE-8R Battery Eliminator

12V Battery Eliminator


12V DC ~ 7.4V Output

AnyTone Tech Earpiece

Replacement Earpiece


Heavy Duty Corded Earpiece with Inline Mic